The FM and HD outputs and audio processing paths of a combination on-air processor differ in several ways: The FM side is pre-emphasized and peak limiting is done via distortion-cancelled clipping. The FM side also has the stereo multiplex generator ...
The VP-8 product does not offer its own built-in RDS capabilities. You must use an external RDS generator and all of the song title/artist data will have pass through that encoder from the automation or playout system. Use one of the the VP-8's SCA ...
In the upper left corner of the System page of the VP-8 GUI is an area called "Special Options" and the top item in that list is an option called "Input/Output Settings Change with Preset Takes". If that option is checked, then when presets are taken ...
VP-8 Manual Download here VP-8 Software Update Instructions Download here VP-8 Preset Note Download here VP-8 Plus Manual Download here VP-8 IP Manual Download here
The audio destinations for the IP12/IP16 front panel headphone jack and cue speaker need to be added after you connect the console to the mix engine blade. Here is how: 1. Add the console as a peripheral device in Navigator. Click the Devices tab in ...
What You Will Need The IP Console Setup GUI WheatNet Navigator Step 1 - Define The Mute Group in VDIPs Open the IP Surface Setup program. This program does not automatically update the list of sources and destinations, so before we begin, do a System ...
Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...