HBX8-R-IP A single rack unit, Ethernet-based single X controller for the WheatNet-IP or Gibraltar TDM network. The HBX8-R-IP has eight buttons that can be front panel programmed with your most popular sources for quick recall. Also contains rotary ...
This is the manual for PC-XY, a X-Y router controller that runs on a Windows PC. Download here When using PC-XY in Windows 10 and 11, it is necessary to right-click and choose Run as Administrator in order for any settings in PC-XY to be saved. You ...
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...
The audio destinations for the IP12/IP16 front panel headphone jack and cue speaker need to be added after you connect the console to the mix engine blade. Here is how: 1. Add the console as a peripheral device in Navigator. Click the Devices tab in ...
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
Use Case You have contact closures coming into your system via relays from a satellite receiver. Your automation system does not have a device to connect the relays, but it does have the WheatNet-IP Audio Driver, which has Software LIOs to send and ...
Overview Let’s take a look at what needs to be done to get your Cisco 9200/9300 switch ready for the installation of your WheatNet‑IP system. Properly configuring your switch allows you to take advantage of the “management” capabilities to control ...