HBx and XYE IP Controller Quick Start

HBx and XYE IP Controller Quick Start

HBX8-R-IP

A single rack unit, Ethernet-based single X controller for the WheatNet-IP or Gibraltar TDM network. The HBX8-R-IP has eight buttons that can be front panel programmed with your most popular sources for quick recall. Also contains rotary encoder and display to access the other available sources.

XYE-R-IP

This is a single rack unit Ethernet based XY router controller. Available sources and destinations can be programmed through the XYE-R-IP software to avoid accidental switching errors. Preprogrammed salvos can be triggered as well.

To use these applications you will require an XYC GUI. You can get that from our support team by opening a ticket here on our support website.
The controllers are also mentioned at the end of the Blade manual, but you can access that excerpt HERE.

    • Related Articles

    • Stagebox Manual/Quick Start Guide

      Stagebox Quick Start Guide Download here Important Note The Stagebox is considered a "micro blade" in the WheatNet-IP system. Micro Blades like the Stagebox do not generate the WheatNet-IP metronome; they only follow it. Stageboxes cannot be the only ...

    • Blade 4 Meter App Quick Start Guide

      The Wheatstone Blade-4 has much improved memory and CPU power over the Blade-3 and thus has the capability to run certain applications directly on the Blade itself. One of these is the Blade-4 Meter App. Based on the Wheatnet IP Meter App, which is a ...

    • Glass LXE Quick Start Guide

      Glass-LXE is a virtual LXE console. You don't need a physical console when you're using Glass-LXE as it takes full advantage of the Blade-3 or Blade-4 LXE mix engine and virtualized the entire console operation, displaying a perfect representation of ...

    • Blade 4 Screen Engine Quick Start Guide

      The Wheatstone Blade-4 has much improved memory and CPU power over the Blade-3 and thus has the capability to run certain applications directly on the Blade itself. One of these is the Blade-4 Meter Script Engine. With the ability to attach a monitor ...

    • Remote DMX Quick Start Guide

      Remote DMX is a licensed ScreenBuilder script; you will need a software license for ScreenBuilder itself as well as this script to run it. This document explains how to license the script and configure it to connect to your DMX Console Blade. ...