Getting the Most out of Navigator
Navigator is the control center for your Wheatstone network. It allows you to set up logic, salvos, configure AES-67 signals, make crosspoints, set up aliases and associated connections, assign attributes to source signals. You can see all the settings for a particular signal at a glance. You can see the status of all your blades. There's so much control packed into this one program.
We've identified a number of lesser-known Navigator features that we think you'll appreciate learning about. Some of these are Navigator's Right-click menu, the Advanced Controls in Navigator, System View menu, Location Settings, Bookmarks, Aliases and Long Names. Those and others are discussed in the document below.
Related Articles
Getting a Navigator License
Download the PDF instructions for obtaining a Navigator License HERE
About Wheatnet-IP Navigator
Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...
Navigator How-To Videos
Setting Up Logic and Machine Start for WheatNet-IP Consoles Whether you have a radio or television console, whether it’s a DMX, LXE, LX-24, IP-12, L-8, Arcus, Strata, Tekton-32 IP Audio Console, you’ll use Navigator to set up your logic. This video ...
All Blades Appear Disconnected in Navigator/Navigator Sees No Blades
The Problem: Navigator seems to hang on startup. It looks like this: When Navigator starts, it tries to communicate using the last IP address it was on when the program was previously run. If you changed the IP address of your computer to something ...
WheatNet-IP Blade 4 and Navigator Manual
This document includes wiring diagrams for all Blade-4 models, how to use Navigator, how to set up logic in Navigator, and a guide to using AES67 with WheatNet-IP. Blade 4 Quick Start Guide Download here Blade 4 Manual Download here