The Wheatstone Scripting & Logic Forum is free for all of our customers. If you use Screenbuilder, or have questions about how to accomplish tasks with Wheatnet logic, check out the forums. This is a great resource for exchange of ideas. If you have ...
Here is the first in a series of Screenbuilder videos intended to help jumpstart you on your scripting journey. This one covers the most basic steps needed to get a simple script up and running and covers a couple of the most common missteps. ...
There is no printed or PDF manual for Screenbuilder or our other script engine-enabled products. This is by design. The Wheatnet Scripting language is constantly evolving and if we were to create a manual for version x, it would inevitably require an ...
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...
The audio destinations for the IP12/IP16 front panel headphone jack and cue speaker need to be added after you connect the console to the mix engine blade. Here is how: 1. Add the console as a peripheral device in Navigator. Click the Devices tab in ...
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
Use Case You have contact closures coming into your system via relays from a satellite receiver. Your automation system does not have a device to connect the relays, but it does have the WheatNet-IP Audio Driver, which has Software LIOs to send and ...
Overview Let’s take a look at what needs to be done to get your Cisco 9200/9300 switch ready for the installation of your WheatNet‑IP system. Properly configuring your switch allows you to take advantage of the “management” capabilities to control ...