Related Articles
SNMP Information
This is a link to the current SNMP MIB for WheatNet-IP Blades SNMP monitoring can be used to trap for silence alarms, blade errors, power supply failures, temperature monitoring and other statuses.
Blade 4 Screen Engine Quick Start Guide
The Wheatstone Blade-4 has much improved memory and CPU power over the Blade-3 and thus has the capability to run certain applications directly on the Blade itself. One of these is the Blade-4 Meter Script Engine. With the ability to attach a monitor ...
Cisco 9300 Switch - Multicast is flooded when "no ip igmp snooping tcn flood" is in config
Background Wheatstone configures access and trunk ports on Cisco switches to use the "no ip igmp snooping tcn flood" command. This command tells the switch to disable the flooding of multicast traffic during a spanning-tree Topology Change ...
How To Configure Comrex Access for WheatNet-IP Using AES67
Prerequisites A Precision Timing Protocol (PTP) v2 clock source on your WNIP Local Area Network. Blades do not generate PTP, but they can lock to it. Comrex codecs running version 4.5p2 or higher can be set to generate PTP clock, or you can use an ...
How To Set Up Telos VX with WheatNet-IP Using AES67
Prerequisites You will need: A Precision Timing Protocol (PTP) v2 clock source on your WNIP Local Area Network. Both the blades and the VoIP phone hybrid need to sync to this clock, and they do not generate it. There are numerous PTP clock generators ...