SNMP monitoring can be used to trap for silence alarms, blade errors, power supply failures, temperature monitoring and other statuses. Click HERE to download the current SNMP MIB for WheatNet-IP Blades
There is no printed or PDF manual for Screenbuilder or our other script engine-enabled products. This is by design. The Wheatnet Scripting language is constantly evolving and if we were to create a manual for version x, it would inevitably require an ...
We understand the following information is specific to usage of HyperVisor and not all virtualization software will behave the same. However, the information below should suffice to help you step through virtualization of most any platform keeping ...
If the Dante device supports AES67, this is how to integrate it into Wheatnet-IP: NOTE: The Wheatnet System must be running at 48K (Dante cards does not support 44.1 for AES67) Put your Dante device on a static address in the WNIP subnet. You need a ...
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...