How To Install Factory Presets on a Voice 1
1. Launch the Voice 1 Remote GUI and connect to the processor.
2. Click the Library button.
3. Hover your mouse in the left pane (labeled "On Voice 1"), then right-click. Choose "Install Factory Preset Package"
4. Navigate to the .fpp file that you downloaded from us and select it. The presets will be installed, usually starting at position 9.
Related Articles
How To Install Factory Presets On The M4IP/M4IPUSB
The .fpp package is a factory preset package and is installed via the M4 Processor GUI. All you need to do is: -- open the GUI and get online to the processor; -- open the GUI's Library dialog; -- right click on the left pane of the Library dialog ...How to install the WyPy CPU Replacement Kit
Things To Do Before You Start Unplugging Things Your LXE must be running at least version 2.4 with OS R8 to begin this process. If your LXE is running any version under 2.4, you should update to version 2.20, which will make the appropriate file ...Audioarts Voice 1 Manual
Voice 1 Quick Start Guide Download here Voice 1 Manual Download hereMoving/Copying Audio Processing Presets
The following document covers how to access and backup your audio processing presets in the following Vorsis Audio and Microphone processors: M1, MG1, M2, M4 and Aura1, Aura8, Air Aura, and MP532 processors. DownloadHow To Install The WNIP Audio Driver
Installing The Audio Driver Before you begin, connect the PC/Server to the WNIP network and set a fixed IP address on the NIC you are using within the WNIP system’s subnet. The default WNIP subnet is 192.168.87.0; your system may be configured ...