How To Install Factory Presets On The M4IP/M4IPUSB

How To Install Factory Presets On The M4IP/M4IPUSB

The .fpp package is a factory preset package and is installed via the M4 Processor GUI. All you need to do is:

 -- open the GUI and get online to the processor;

 -- open the GUI's Library dialog;

 -- right click on the left pane of the Library dialog (this pane shows what presets are on the hardware);

 -- select the "Install Factory Preset Package" option;

 -- navigate to wherever the .fpp package is and select it;

 -- say okay to installing the package;

 -- watch while the .fpp package is transferred to the processor and the presets are automatically factory locked.


    • Related Articles

    • How To Install The WNIP Audio Driver

      Installing The Audio Driver Before you begin, connect the PC/Server to the WNIP network and set a fixed IP address on the NIC you are using within the WNIP system’s subnet. The default WNIP subnet is 192.168.87.0; your system may be configured ...

    • Wheatstone Audio Processor Factory Default IP Addresses and Port Numbers

      Product Default IP Address Default Front Panel Address TCP Port Used AM-5 192.168.1.190 N/A 55893 AM-10 192.168.1.211 N/A 55895 AM-55 192.168.1.155 N/A 55905 AP-3 192.168.1.191 N/A 55888 AP-1000 192.168.1.200 192.168.1.201 55888 AP-2000 192.168.1.220 ...

    • Moving/Copying Audio Processing Presets

      The following document covers how to access and backup your audio processing presets in the following Vorsis Audio and Microphone processors: M1, MG1, M2, M4 and Aura1, Aura8, Air Aura, and MP532 processors. Download

    • Changing The IP Address Of The IP-12/IP-16

      While there is a function to change the IP address in the console GUI, it is easier to use PuTTY or another telnet client to accomplish the task. Instructions Open the terminal program and connect via Telnet to the console’s current IP address. Your ...

    • About Wheatnet-IP Navigator

      Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...