Popular Articles
How To Set Up On-Air Lights and Mic Muting on an IP12/IP16
What You Will Need The IP Console Setup GUI WheatNet Navigator Step 1 - Define The Mute Group in VDIPs Open the IP Surface Setup program. This program does not automatically update the list of sources and destinations, so before we begin, do a System ...
Wheatstone FM-5 Manual
This is the manual for the Wheatstone FM-55. Download here
Wheatstone FM-55 Manual
This is the manual for the Wheatstone FM-55. Download here
About Wheatnet-IP Navigator
Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...
How To Use Dante Devices in AES67 Mode with WheatNet-IP Devices
If the Dante device supports AES67, this is how to integrate it into Wheatnet-IP: NOTE: The Wheatnet System must be running at 48K (Dante cards don't support 44.1 for AES67) Put your Dante device on a static address in the WNIP subnet. You need a PTP ...