The Blade 4 TVE (TV Mix Engine) blade has a new redundancy feature. Two blades may be configured in a hot standby setup. Upon failure, the backup blade will take over in under 3 seconds and will keep all of the routes and mixing intact. As of this ...
Problem: If you overpress the adjust knob on a console fader and adjust the gain, or if you use the touchscreen to adjust the gain on a microphone fader, the level does not change. The source in question is also routed to a second console, and the ...
Click HERE to view a video on creating a USB Clip Player for Arcus Click HERE to download a pdf with instructions for creating a USB Clip Player for Arcus
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...
The audio destinations for the IP12/IP16 front panel headphone jack and cue speaker need to be added after you connect the console to the mix engine blade. Here is how: 1. Add the console as a peripheral device in Navigator. Click the Devices tab in ...
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
Use Case You have contact closures coming into your system via relays from a satellite receiver. Your automation system does not have a device to connect the relays, but it does have the WheatNet-IP Audio Driver, which has Software LIOs to send and ...
Netgear’s M4250 AV Series is a line of Ethernet switches designed for Audio/Video over IP and targeted at the broadcast and sound contracting markets. While many features used for multicast IP audio are enabled on this switch by default, careful ...