LXE
How To Talk Back To A Remote/How To Program The TB Button
Wheatstone IP Audio Consoles have a TB button for talkback. How does it work? 1. Route the microphone you want to use to the Talkback Mic destination for the console. It will look like this: You might be tempted to lock this destination so it doesn't ...
Microphone gain controls are locked if in use on another console
Problem: If you overpress the adjust knob on a console fader and adjust the gain, or if you use the touchscreen to adjust the gain on a microphone fader, the level does not change. The source in question is also routed to a second console, and the ...
How To Add a SS-8 (SSP-8) Panel to the LXE, GSX, or LX-24
Here's how to add an SS8 scriptable button panel to an LXE or GSX console. The jumpers and ribbon cable provide power and ethernet connectivity to the panel from the console. If you are installing the panel in an LX-24, you won't use the jumpers or ...
How To Manage LXE Panel and Screen Scripts
The LXE consoles allow you to save your settings, including panel and screen scripts, in a "project" file. You can have as many project files as you wish. When you first receive your LXE console, you might wish to save a project called "Factory ...
Console Maintenance and Cleaning
Internal Maintenance The main accumulation of dust in a console will be found on the motherboard, which is mounted in the bottom of the console frame. You can use either a vacuum cleaner or compressed air, or a combination of these, to remove as much ...
Switching Studios With Momentary LIO/LED and Console Spare Buttons
The Spare Button LEDs on Wheatstone consoles can be turned on by various methods. By default, the surface itself turns a spare button's LED on when the button is pressed. But sometimes you want the LED to display some kind of status such as when you ...
How To Clean Penny & Giles Faders
How To Replace A LXE CPU (Jetway)
Disconnect the cables and move the LXE console blade from the rack and remove the lid. There are 12 screws that hold the lid in place; six on top and three on each side. Unplug the DC cable and battery backup from the Jetway assembly. Remove the ...
How To Set Up A Mic Tally Light
Key Concepts This article covers how to create a Mic Tally light for one microphone that is tied to that microphone being turned on and off. This would be applicable for a LED light mounted on a mic arm or some sort of tally indicator for a single ...
How To Set Up Remote Starts and Stops on a LXE Console
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
LXE Setup GUI Doesn’t See Modules/Navigator Doesn’t See Blades
If the LXE GUI doesn’t see the modules and/or Navigator doesn’t see the blades check the Windows Firewall. The WNIP network will be considered a “public” network by Windows, which has the most restrictive rules in Windows, and it’s blocking our ...
Wheatstone LXE Manual
LXE Quick Start Guide Download here LXE Manual Download here Remote LXE Guide Download here Glass LXE Guide Download here
How To Set Up On-Air Lights and Mic Muting on a LXE
What You Will Need The LXE Console Setup GUI WheatNet Navigator Step 1 - Define The Mute Group in VDIPs Open the LXE Surface Setup program. Choose Synch from an LXE Surface The GUI displays all consoles that it can find. Select the one you want and ...