GSX
How To Talk Back To A Remote/How To Program The TB Button
Wheatstone IP Audio Consoles have a TB button for talkback. How does it work? 1. Route the microphone you want to use to the Talkback Mic destination for the console. It will look like this: You might be tempted to lock this destination so it doesn't ...
Microphone gain controls are locked if in use on another console
Problem: If you overpress the adjust knob on a console fader and adjust the gain, or if you use the touchscreen to adjust the gain on a microphone fader, the level does not change. The source in question is also routed to a second console, and the ...
Console Maintenance and Cleaning
Internal Maintenance The main accumulation of dust in a console will be found on the motherboard, which is mounted in the bottom of the console frame. You can use either a vacuum cleaner or compressed air, or a combination of these, to remove as much ...
Switching Studios With Momentary LIO/LED and Console Spare Buttons
The Spare Button LEDs on Wheatstone consoles can be turned on by various methods. By default, the surface itself turns a spare button's LED on when the button is pressed. But sometimes you want the LED to display some kind of status such as when you ...
How To Clean Penny & Giles Faders
How To Set Up A Mic Tally Light
Key Concepts This article covers how to create a Mic Tally light for one microphone that is tied to that microphone being turned on and off. This would be applicable for a LED light mounted on a mic arm or some sort of tally indicator for a single ...
How To Set Up Remote Starts and Stops on a GSX Console
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
Wheatstone GSX Manual
GSX Quick Start Guide Download here GSX Manual Download here
How To Set Up On-Air Lights and Mic Muting on a GSX
What You Will Need The GSX Console Ssetup GUI WheatNet Navigator Step 1 - Define The Mute Group in VDIPs Open the GSX Surface Setup program. This program does not automatically update the list of sources and destinations, so before we begin, do a ...