Popular Articles
Audioarts D-75 Audio Console Manual
D-75 Manual Download here D-75 Technical Guide Download here
What's New in Navigator 5
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...
How To Configure Netgear M4250 AV Series for WheatNet-IP
Netgear’s M4250 AV Series is a line of Ethernet switches designed for Audio/Video over IP and targeted at the broadcast and sound contracting markets. While many features used for multicast IP audio are enabled on this switch by default, careful ...
How To Use Dante Devices in AES67 Mode with WheatNet-IP Devices
If the Dante device supports AES67, this is how to integrate it into Wheatnet-IP: NOTE: The Wheatnet System must be running at 48K (Dante cards does not support 44.1 for AES67) Put your Dante device on a static address in the WNIP subnet. You need a ...
How To Configure Cisco 9200x/9300x for WheatNet-IP
Overview Let’s take a look at what needs to be done to get your Cisco 9200/9300 switch ready for the installation of your WheatNet‑IP system. Properly configuring your switch allows you to take advantage of the “management” capabilities to control ...