Popular Articles
What's New in Navigator 5
Navigator 5, in concert with current Blade software, provides a plethora of new features helpful in administering and diagnosing the health of the Blades in your WheatNet-IP system at a glance. Diagnostics The Diagnostics tab gives you three graphs ...
How to solve No Audio on IP12/IP16 Headphone Jack or No Audio from IP12/IP16 Cue Speaker
The audio destinations for the IP12/IP16 front panel headphone jack and cue speaker need to be added after you connect the console to the mix engine blade. Here is how: 1. Add the console as a peripheral device in Navigator. Click the Devices tab in ...
How To Set Up Remote Starts and Stops on a LXE Console
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...
How To Turn Hardware Relay Closures From A Satellite Receiver Into Virtual Software LIOs To Connect To Automation
Use Case You have contact closures coming into your system via relays from a satellite receiver. Your automation system does not have a device to connect the relays, but it does have the WheatNet-IP Audio Driver, which has Software LIOs to send and ...
Wheatstone ReMIX Manual
ReMIX is software used to remotely control a utility mixer built into a blade. Engineering Setup Guide Download here User Quick Start Guide This document explains how to use the program and is meant to be given to the air talent in training. Download ...