WheatNet-IP LIO Log Viewer Manual

• Related Articles

• WheatNet-IP Event Scheduler

  What is WNIP Event Scheduler? This program works in conjunction with Blade logic and automation to allow for automated and timed control of Wheatnet-IP functionality, up to and including remote machine control, on air lights, tallies, transmitter ...

• Wide Orbit WheatNet-IP Logic Setup

  These instruction sets apply to WideOrbit Automation for Radio versions 2.x to 3.7.x. Newer versions are likely similar. WideOrbit can address SLIO’s on blades via the Wheatnet ACI. For this setup you will need WO automation for Radio Device Server ...

• Wide Orbit WheatNet-IP Logic Setup

  These instruction sets apply to WideOrbit Automation for Radio versions 2.x to 3.7.x. Newer versions are likely similar. WideOrbit can address SLIO’s on blades via the Wheatnet ACI. For this setup you will need WO automation for Radio Device Server ...

• Understanding Logic in Wheatnet-IP

  How to set up on air lights? Machine starts and stops? Tally lights? We'll explain how here. There are three rules that guide all logic in the WheatNet-IP system: 1. A WNIP source needs to connect to a WNIP destination. Think of the crosspoint grid ...

• Using WheatNet-IP Software LIOs to control VoxPro 7

  This document explains how to configure bi-directional remote control functions on WheatNet-IP consoles and the WheatNet-IP audio driver. We'll start in Navigator. In our example, we have configured VoxPro to record and play back from WNIP Audio ...