WheatNet-IP Blade 3 and Navigator Manual
This document includes wiring diagrams for all Blade-3 models, how to use Navigator, how to set up logic in Navigator, and a guide to using AES67 with WheatNet-IP.
Blade 3 Quick Start Guide
Blade 3 Manual
Related Articles
WheatNet-IP Blade 4 and Navigator Manual
This document includes wiring diagrams for all Blade-4 models, how to use Navigator, how to set up logic in Navigator, and a guide to using AES67 with WheatNet-IP. Blade 4 Quick Start Guide Download here Blade 4 Manual Download hereLegacy WheatNet-IP Navigator and Blade 2 Manual with Evolution Series Integration
This is the manual for our Legacy WheatNet-IP Blade 2 product, earlier versions of Navigator and how Blades integrate with Evolution Series equipment. Note that Blade 2 hardware can be upgraded to run software version 3 and higher, and Evolution ...WheatNet-IP Event Scheduler
What is WNIP Event Scheduler? This program works in conjunction with Blade logic and automation to allow for automated and timed control of Wheatnet-IP functionality, up to and including remote machine control, on air lights, tallies, transmitter ...The Wheatnet-IP Meter App
What is the Meter App? The IP Meters software for Wheatnet-IP gives you a fully customizable and nearly limitless display of meters from your Wheatnet system including but not limited to audio peak levels, average levels, signal density, FFT graphs, ...Understanding Logic in Wheatnet-IP
How to set up on air lights? Machine starts and stops? Tally lights? We'll explain how here. There are three rules that guide all logic in the WheatNet-IP system: 1. A WNIP source needs to connect to a WNIP destination. Think of the crosspoint grid ...