Solving Keylok USB Security Key Issues in Windows 11

Solving Keylok USB Security Key Issues in Windows 11

Keylok Driver Update

If your Windows 11 PC does not find the Keylok USB key (it will show up as unknown in the Windows Device Manager and the license will not validate) do the following:
  1. Go to the Keylok Website and download Install.exe from their support page. This is their latest release.
  2. Follow the instructions of the setup wizard; it will prompt you when it is time to insert the dongle.
  3. When prompted for Dongle Type, check KEYLOK 2 (USB w/Driver). When prompted for Installation Type, select Standalone.
  4. After installation, the license will validate. If it doesn't, read on to the next section.

Windows Memory Integrity

In Windows 11, Windows Memory Integrity can prevent the Keylok driver from loading. If this happens, even with the latest Keylok driver installed, the USB key will have a caution sign in device manager and Windows will throw a pop-up saying a security setting prevented a driver from loading. To fix go to Windows Security, then go to Core Isolation, and turn Memory Integrity off. Reboot. The driver will load.

    • Related Articles

    • Optimizing Windows for the WheatNet-IP AoIP Driver

      Introduction Audio over IP (AoIP) is the transportation of digital audio via local or wide area networks using the Internet Protocol. Due to the very nature of ethernet, there are numerous obstacles to the efficient transport of audio (and video) ...

    • USB Devices FAQ

      My Win 10 PC is only getting the left channel over USB. What's the issue? You must use Windows 10, release 1803 or later for the USB audio to work properly. At this point in the Windows 10 lifecycle, all PCs should be on a build that supports stereo ...

    • Using Wireshark to Diagnose AoIP Issues

      Back in the old days, you could find any signal in a radio/TV station with a Telco Butt-set. Now that everything is IP, the go-to tool is Wireshark. If you don't have it already, download here. Simple Troubleshooting Sometimes we can use the ...

    • Windows Update Sample Rate Switch

      Windows updates can strike fear in the hearts of WheatNet-IP users that use our M4usb mic blades or our AoIP virtual audio drivers. If a new Windows audio driver component is installed with an update, it can reset the system sample rate of your audio ...

    • How To Move XPoint from a Windows XP machine to Windows 7/10/11

      Rather than seek out a new installer and install it on the new PC, we prefer to have the files copied from the old PC whenever possible. This assures that you are using a compatible version of XPoint, since in many cases installing a newer version of ...