Legacy WheatNet-IP Navigator and Blade 2 Manual with Evolution Series Integration
This is the manual for our Legacy WheatNet-IP Blade 2 product, earlier versions of Navigator and how Blades integrate with Evolution Series equipment.
Note that Blade 2 hardware can be upgraded to run software version 3 and higher, and Evolution Series consoles can be used with version 3 and higher, therefore this manual has been superseded by the Blade 3 and Blade 4 manual, depending upon which version software you have installed.
If you are running Blade 2 hardware on software version 1.x or 2.x and would like to upgrade to the current release, it is necessary to purchase a new Navigator license to obtain the software update. Contact us in support if you need help with this.
Related Articles
Wheatstone Series Four Television Console Manual
This is the technical manual for the Series Four Television Console. Download here
WheatNet-IP Blade 4 and Navigator Manual
This document includes wiring diagrams for all Blade-4 models, how to use Navigator, how to set up logic in Navigator, and a guide to using AES67 with WheatNet-IP. Blade 4 Quick Start Guide Download here Blade 4 Manual Download here
WheatNet-IP Blade 3 and Navigator Manual
This document includes wiring diagrams for all Blade-3 models, how to use Navigator, how to set up logic in Navigator, and a guide to using AES67 with WheatNet-IP. Blade 3 Quick Start Guide Download here Blade 3 Manual Download here
Evolution Series Network Manual
This is the manual for the WheatNet Evolution Series Networking. (This is different from WheatNet-IP) First Edition Manual Download here Second Edition Manual Download here
About Wheatnet-IP Navigator
Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...