Interfacing AudioVault to WheatNet-IP

• Related Articles

• Interfacing ENCO DAD to WheatNet-IP

  This document applies to all WheatNet-IP consoles, beginning with the Evolution and Generation radio console series through current products such as LXE, GSX, L Series, IP Series, and DMX. It also pertains to Dimension Series (D series) television ...

• Sample Rates and Clocking In WheatNet-IP

  en you installed your first Wheatstone Blade, you were asked to select a sample rate for that Blade. You either chose 48000 samples/second, or 44100 samples/second. As you installed additional Blades, you presumably selected the same sample rate for ...

• About Wheatnet-IP Navigator

  Navigator is the "control center" for your Wheatnet IP System. You'll use Navigator frequently to add or change signal parameters (including signal names), set up logic signals, salvos and associated connections, and make routing (crosspoint) changes ...

• WheatNet-IP Event Scheduler

  What is WNIP Event Scheduler? This program works in conjunction with Blade logic and automation to allow for automated and timed control of Wheatnet-IP functionality, up to and including remote machine control, on air lights, tallies, transmitter ...

• MADI Interfacing Considerations

  Introduction The MADI interface (AES-10) allows the transport of up to 64 mono channels in either direction. MADI is a common method for connecting two different systems (TDM and AOIP) or gear from different manufacturers (i.e. WNIP to an intercom or ...