GPC-IP System Manual (GP-3, GP4S, GP4W, GPIP-8, GPIP-16)

• Related Articles

• How To Set Up Remote Start/Stop LIO Logic for Any Automation System with WheatNet-IP

  Automation Channel Turns On Console Fader With the source disconnected from all destinations, edit the source. Click on the LIO Info Tab. Click the Add button. Expand the tree on the PC Driver Blade you wish to use. Click on the line of the Soft LIO ...

• How To Set Up Remote Start/Stop LIO Logic for Any Automation System with WheatNet-IP

  Automation Channel Turns On Console Fader With the source disconnected from all destinations, edit the source. Click on the LIO Info Tab. Click the Add button. Expand the tree on the PC Driver Blade you wish to use. Click on the line of the Soft LIO ...

• The Wheatnet-IP Meter App

  What is the Meter App? The IP Meters software for Wheatnet-IP gives you a fully customizable and nearly limitless display of meters from your Wheatnet system including but not limited to audio peak levels, average levels, signal density, FFT graphs, ...

• Wheatstone IP-12/IP-16 Manual

  This is the manual for the IP-12 and IP-16. Download here

• Wide Orbit WheatNet-IP Logic Setup

  These instruction sets apply to WideOrbit Automation for Radio versions 2.x to 3.7.x. Newer versions are likely similar. WideOrbit can address SLIO’s on blades via the Wheatnet ACI. For this setup you will need WO automation for Radio Device Server ...