DMX Console Default Crosspoint Mapping
These are the internal system crosspoints that are set up by default when you first install your DMX console. They create the necessary outputs for the program busses as well as the cue and headphone streams. If you are having problems with any of these signals, check the default crosspoints. These should normally be locked.
If you change the routing to these defaults, even if you lock the signal the default routes will ALWAYS be restored on boot unless the feature is turned off.
For example, if you want to repurpose one of the PGMB/PGMC/PGMD outputs on the console blade and route something else there, the blade routes will change to the defaults anytime the console boots until you uncheck the feature and apply it to the console.
This is the setting you need to adjust in the DMX Console Setup GUI:
Uncheck the box and click Apply to disable the
Related Articles
How To Set Up Remote Starts and Stops on a DMX Console
Key Concepts We will be editing the source in Navigator. In WheatNet-IP, the logic is associated with the source, not the fader. That way, when you move the source to a different fader, the logic follows wherever the source goes. When a source is ...How To Network DMX Consoles Together
Introduction While there is a small Ethernet switch built into the DMX Console Blade, it is primarily there to connect the console, blade, maybe a PC with a WheatNet-IP driver, and another blade in a studio, and this is how the switch is configured ...How To Set Up On-Air Lights and Mic Muting on a DMX
What You Will Need The DMX Console Ssetup GUI WheatNet Navigator Step 1 - Define The Mute Group in VDIPs Open the DMX Surface Setup program. This program does not automatically update the list of sources and destinations, so before we begin, do a ...Audioarts DMX-8/DMX-16 Manual/How-To Videos
DMX Console Quick Start Guide Download here DMX Mix Engine Quick Start Guide Download here How To Network a DMX Engine With A Wheatstone Blade System Download here How-To VideosSwitching Studios With Momentary LIO/LED and Console Spare Buttons
The Spare Button LEDs on Wheatstone consoles can be turned on by various methods. By default, the surface itself turns a spare button's LED on when the button is pressed. But sometimes you want the LED to display some kind of status such as when you ...