Console Meters Scroll Continuously. Console Not Connected To Engine

Problem

When the console is not connected to its engine, the meters scroll continuously and no text is displayed.

Solution

1. Connect to the console using the Console Setup GUI.
   
   After you have opened the GUI, click to highlight the console at the bottom and make sure the Online box next to the add/editremove buttons is checked. You will see "(console name) Connected" at the bottom right when the GUI is online
   
   
2. Make sure that BOTH the blade ID and the blade IP address are correct. If one is incorrect or missing it will fail.
   
   
3. Click the apply button at the bottom to send the changes to the console.
   
4. Go to the Hardware menu and choose Reboot
   
   After the console reboots, it will connect to the engine blade and you will be all set.
   

• Related Articles

• Console Meters Scroll Continuously. Console Not Connected To Engine

  Problem When the console is not connected to its engine, the meters scroll continuously and no text is displayed. Solution Connect to the console using the Console Setup GUI. Make sure that BOTH the blade ID and the blade IP address are correct. If ...

• Console Meters Scroll Continuously. Console Not Connected To Engine

  Problem When the console is not connected to its engine, the meters scroll continuously and no text is displayed. Also, in Navigator, the picture of the console in the system tree will have an IP of 0.0.0.0 because the console isn't connected to the ...

• Wheatstone Series Four Television Console Manual

  This is the technical manual for the Series Four Television Console. Download here

• How To Configure Redundant TVE (TV Mix Engine) Blades

  The Blade 4 TVE (TV Mix Engine) blade has a new redundancy feature. Two blades may be configured in a hot standby setup. Upon failure, the backup blade will take over in under 3 seconds and will keep all of the routes and mixing intact. As of this ...

• DMX Mix Engine Rebooting/Falling off Network - Console scrolling meterbridge

  Symptom: Your DMX surface appears with meters scrolling or appears to be disconnecting from the network. You have looked in Navigator and you see the Mix Engine is showing up with a ? over it. You are losing audio and even after reboots are unable to ...