Blade 4 Meter App Quick Start Guide
The Wheatstone Blade-4 has much improved memory and CPU power over the Blade-3 and thus has the capability to run certain applications directly on the Blade itself. One of these is the Blade-4 Meter App. Based on the Wheatnet IP Meter App, which is a standalone PC application, this allows you to use the monitor attached to your Blade-4 to view one or more meters from sources or destinations in your Wheatnet network, and also gives you one analysis window in which you can run various tools such as phase analysis, Loudness monitor, on-screen oscilloscope and others.
Related Articles
Blade 4 Screen Engine Quick Start Guide
The Wheatstone Blade-4 has much improved memory and CPU power over the Blade-3 and thus has the capability to run certain applications directly on the Blade itself. One of these is the Blade-4 Meter Script Engine. With the ability to attach a monitor ...
Glass LXE Quick Start Guide
Glass-LXE is a virtual LXE console. You don't need a physical console when you're using Glass-LXE as it takes full advantage of the Blade-3 or Blade-4 LXE mix engine and virtualized the entire console operation, displaying a perfect representation of ...
Stagebox Manual/Quick Start Guide
Stagebox Quick Start Guide Download here Important Note The Stagebox is considered a "micro blade" in the WheatNet-IP system. Micro Blades like the Stagebox do not generate the WheatNet-IP metronome; they only follow it. Stageboxes cannot be the only ...
The Wheatnet-IP Meter App
What is the Meter App? The IP Meters software for Wheatnet-IP gives you a fully customizable and nearly limitless display of meters from your Wheatnet system including but not limited to audio peak levels, average levels, signal density, FFT graphs, ...
Remote DMX Quick Start Guide
Remote DMX is a licensed ScreenBuilder script; you will need a software license for ScreenBuilder itself as well as this script to run it. This document explains how to license the script and configure it to connect to your DMX Console Blade. ...